When replacing the electrode, the exchange procedure
is done without moving to the exchange position,
so the exchange time is very short and the position accuracy
is maintained.
Loadable Electrode : More than hundreds of electrode
(depends on the electrode size)
Exchanging time : Less than 1 min.
Exchange method : Exchanging without moving
to exchanging position keeps position accuracy.
Electrode Wear
Low consumption of electrode (Especially for drilling small hole under 0.3mm)
Ex.) SKD-11
KTC EDM : 70~80% (Able to drill 8 holes)
Competitors : 120~140% (Able to drill 5 holes)
Pump – Pneumatic Type
The EDM drill pump, which requires liquid to pass through
very small electrode holes, has a great influence
on the completeness(quality) of the result.
We use air type pump to discharge the processing liquid
more quickly and uniformly without pulsation.
This gives a good machined surface and
maintains a uniform discharge gap.
Max. setting pressure : 250 Kg/§² (Optional)
Much less pressure pulsation
Low noise and vibration
High Durability
Various processing liquids such as water, oil and carbon can be used.
Easy maintenance
Axis driving Type
– Servo motor
Driving motor
AC servo motor
Unlike competitors using
stepping motors,
we use precision
servo motors.
Low noise and vibration
Fast and precise position control (smooth axis feed)
High Durability
High precision product
MPG (Manual Pulse Generator)
Easy workpiece setting is possible by MPG which
can control up to 0.001mm.
x, y, z axis step feed (feed unit: 0.001 / 0.01 / 0.1)
Precision control
Shortening the setting time
Immediate and intuitive control
Workpiece fixing method
It is a method to put a workpiece
on a sliding rectangular jig bed.
Stable movement even when moving heavy workpieces.
Adress:23, Geonji-ro 121beon-gil, Seo-gu, Inchon, Republic of Korea (22773) Tel:+82 32 665 4141 Fax:+82 665 4149 E-mail:ktc@superdrill.co.kr
COPYRIGHT(C) 2017 KTCEDM Co., Ltd.. ALL RIGHT RESERVED.