ktcedm logo
 
 
Á¦Ç°¸ñ·Ï
EDB-435
EDB-435F
EDB-435FħÀü
EDB-550
EDB-640F
EDB-1060F
SD-1M
EDM-DR
À妽º
ÀÌÀüÁ¦Ç°
 
Ȩ > Á¦Ç°¼Ò°³ > ÀÌÀüÁ¦Ç°
tltÀÌÀüÁ¦Ç°
ARTRAS EZEN PLUS EZ430NC SD-1M PLUS SD430NC EDB 640
EDB 740 EZ 430 ED 1      
 
- 0.08mm ~ 4.00mm
- LM Guide Å×À̺í
- Çìµå¼±È¸
- Çìµå °¢µµ Á¶Àý(°æ»ç°¡°ø)
- ¹Ì¼¼°¡°ø
   
Ư¡
SD1M drills through almost any conductive material including tungsten carbide, harness steel, iron, copper and brass.

SD1M opens small holes using hollow copper electrode diameter from 0.08mm to 4.00mm(0.003inch to 0.118inch) a high speed.(Max machining rate of 100mm(3.20inch)/min.)

With extremely low electrode wear(5-20%) in low wear machining, it delivers overwhelming cost effectiveness when compared with similar machines.

The versatile, swiveling and swinging head can easily open angle holes on flat, spherical and curved surfaces. If also works on pieces too large to be clamped to the worktable.

SD1M provides an EDM machining operation with an oil free, water-based dielectric fluid.
»ç¾ç
1) Max. workpiece size(W x D x H)
: 600mm X 500mm X 250mm
2) Machine Table : 350 x 250mm
3) Z axis stroke : 250mm
4) Electrode guide travel distance : 270mm
5) Z axis rotation angle : 180degree
6) Z axis cross travel distance : 200mm
7) Z axis slant : 90degree
8) Usable electrode diameter : 0.08mm-4.00mm
9) Z axis increment :0.01mm
10) Outside dimension : 800 X 1002 X 1642mm
1) Max. power input : 4KVA
2) Input voltage : AC 3phase 220V 50/60Hz
3) Max. Machining current : 40A
1) Dielectric fluid
2) Fluid capacity : 20liters
 
 
 
ÀÎõ±¤¿ª½Ã ¼­±¸ °ÇÁö·Î121¹ø±æ 23(¿ì.22773) Tel:032 665 4141 Fax:032 665 4149 E-mail:ktc@superdrill.co.kr
»ç¾÷ÀÚ¹øÈ£: 130 81 54505 ´ëÇ¥ÀÚ:±è±Ô¼º
COPYRIGHT(C) 2017 (ÁÖ)ÄÉÀÌƼ¾¾À̵ð¿¥. ALL RIGHT RESERVED.